5. Adjust the paper guides by pressing in the guide release and carefully moving the
Edge Guide until it lightly touches the edge of the stock in the tray.
Do not load materials above the MAX line located on the rear Edge Guide.
6. Gently push in the tray until it comes to a stop.
7. If the Tray Properties window displays on the print server, confirm the correct tray
to which it is printing and other information, including size (9 x 11 inches), type (precut
tab), and, if necessary, paper curl and / or alignment option.
8. Select OK to save the information and close the Tray Properties window.
Loading Transparencies in Trays 1, 2, and 3
Note
Do not use transparencies with the white side strip (either permanent or removable)
At the Stock Library Manager, make sure to select Transparency as the Paper or Media
Type and select the tray containing the transparencies as the Paper Source.
1. Select the appropriate paper stock for your print job.
2. Pull out the tray slowly until it stops.
3. Fan the transparencies to stop them from sticking together before loading into the
tray.
4. Load a small stack of paper into the tray first. The paper must be the same size as
the transparencies.
5. Load the transparencies LEF on top of this paper stack. Align the edge of the
transparencies with a removable stripe against the left edge of the tray, with the side
to be printed on facing down.
Note
• Do not mix paper and transparencies in a tray. Jams may occur.
• Do not load more than 100 transparencies in a paper tray at one time.
• Load 8.5 x 11 in (A4) transparencies long edge feed only (landscape).
6. Adjust the paper guides by pressing in the guide release and carefully moving the
Edge Guide until it lightly touches the edge of the material in the tray.
Do not load materials above the MAX line located on the rear Edge Guide.
7. Gently push in the tray until it comes to a stop.
If enabled by your System Administrator, the Paper Tray Properties window displays
on the Stock Library Manager on the print server. The Stock Library Manager is not
available at the press.
Xerox
®
Versant
®
2100 Press4-4
User Guide
Paper and Other Media
To Next Page
Loading...
