Xerox Versant 80 Press - Page 174

Recommended solutionPossible causeFault codeFault Area
Power-cycle the machine.
Contact your Xerox Customer
Support Center.
An error occurred in the
document feeder.
005-274, 005-
275, 005-280,
005-281, 005-
282, 005-283
Document Feeder
Power Off/On the press.
If error persists, contact the
Customer Support Center.
Fuser Assembly belt speed
fault
010-319Fuser Assembly
Power Off/On the press.
If error persists, contact the
Customer Support Center.
Pressure Roll Sensing fault,
Humidity Sensor fault, Fuser
Belt error, Temperature
faults, and Fuser Motor
fault
010-604, 010-
605, 010-606,
010-607, 010-
608, 010-612,
010-613
Check the belt module install-
ation. Replace Belt Module
Assembly.
Fuser Belt walk failure010-611
Power-cycle the machine.
Contact your Xerox Customer
Support Center.
An error occurred on the
software settings.
016-210, 016-
211, 016-212,
016-213, 016-
214, 016-215
Press Software
Power-cycle the machine.
Contact your Xerox Customer
Support Center.
The machine does not have
the software license.
016-219
Power-cycle the machine.
Contact your Xerox Customer
Support Center.
An error occurred in the
document scanner.
016-220, 016-
221, 016-222,
016-223, 016-
224, 016-225,
016-226, 016-
227, 016-228
Scanner (Document
Feeder/Glass)
Login as administrator. Select
Machine Status > Tools >
System Settings > Common
Service Settings > Mainten-
ance > Delete All Certificates
/ Initialize Settings. From the
screen, select Start.
Software error016-405General
Check the DNS configurations
and IP address retrieve
method.
Unable to retrieve IP ad-
dress from DNS.
016-454Connectivity / Net-
work
Remove unnecessary data
from the hard disk to increase
free disk space.
Annotation is not possible
due to insufficient hard disk
space.
016-708General
Xerox
®
Versant
®
80 Press14-12
User Guide
Press Problem Solving