Xerox Multi-Function Device Security Target
51
Copyright
2013 Xerox Corporation. All rights reserved.
FMT_MSA.3.1 (USER) The TSF shall enforce the [User Access Control
SFP in Table 21] to provide permissive default values for
security attributes that are used to enforce the SFP.
FMT_MSA.3.2 (USER) The TSF shall allow the [U.ADMINISTRATOR
(System Administrator)] to specify alternative initial values
to override the default values when an object or
information is created.
Application Note: This SFR is FMT_MSA.3 (a) from The IEEE Std. 2600.2
PP.
6.3.6.4. FMT_MSA.3 (FUNC) Static attribute initialisation
Hierarchical to: No other components.
Dependencies: FMT_MSA.1 Management of security attributes
FMT_SMR.1 Security roles
FMT_MSA.3.1 (FUNC) The TSF shall enforce the [TOE Function Access
Control Policy] to provide permissive default values for
security attributes that are used to enforce the SFP.
FMT_MSA.3.2 (FUNC) The TSF shall allow the [U.ADMINISTRATOR
(System Administrator)] to specify alternative initial values
to override the default values when an object or
information is created.
Application Note: This SFR is FMT_MSA.3 (b) from The IEEE Std. 2600.2
PP.
6.3.6.5. FMT_MTD.1 (MGMT1) Management of TSF data
Hierarchical to: No other components.
Dependencies: FMT_SMR.1 Security roles
FMT_SMF.1 Specification of Management Functions
FMT_MTD.1.1 (MGMT1) The TSF shall restrict the ability to [download] the
[audit log] to [U.ADMINISTRATOR (System
Administrator)].
Application Note: This SFR is part of FMT_MTD.1 from The IEEE Std.
2600.2 PP.
6.3.6.6. FMT_MTD.1 (MGMT2) Management of TSF data
Hierarchical to: No other components.
Dependencies: FMT_SMR.1 Security roles
FMT_SMF.1 Specification of Management Functions
To Next Page
Loading...
Need help?
General
