04
• Do not place the charging dock near a heat source.
• Do not use a wet cloth or wet hands to wipe or clean the dock’s charging contacts.
• If the robot vacuum will not be used for an extended period, fully charge it, then turn it
off and store in a cool, dry place. Recharge the robot vacuum at least once every 3
months to avoid over-discharging the baery.
• The lithium-ion baery pack contains substances that are hazardous to the
environment. Before disposing of the robot vacuum, please first remove the baery
pack, then discard, or recycle it in accordance with local laws and regulations of the
country or region it is used in.
• The baery must be removed from the appliance before it is scrapped.
• The appliance must be disconnected from the supply mains when removing the
baery.
• The baery is to be disposed of safely.
• When removing the baeries from the product, it is beer to use up the baeries
and make sure your product is disconnected from power.
1). Uninstall the screw on the boom, then remove the cover.
2). Unplug the baery connector, then remove the baeries. Do not damage the
baery case to avoid any risk of injuries.
3). Return the baeries to a professional recycling organization.