Xiaomi Focus Pen - Pairing and Charging; Safety and Disposal Precautions; WEEE; CAUTION

Thank you for choosing
Xiaomi Focus Pen
This product is compatible with
Xiaomi Pad 6S Pro 12.4
For more compatibility information, visit our
official website:
www.mi.com/global/service/userguide
Pairing and Charging
Please aach the stylus body horizontally
to the centre of the long side of the tablet
(as shown in the figure), perform Bluetooth
pairing and start charging.
Note: Please turn on the Bluetooth function
on your tablet beforehand
For more information, visit our official
website:
www.mi.com/global/service/userguide
WEEE
Special precautions must be
taken to safely dispose of this
product. This marking indicates
that this product may not be
discarded with other household
waste in the EU.
To prevent harm to the environment or
human health from inappropriate waste
disposal, and to promote sustainable
reuse of material resources, please recycle
responsibly.
To safely recycle your device, please use
return and collection systems or contact
the retailer where the device was originally
purchased.
CAUTION
RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING
TO INSTRUCTIONS.
Additional safety information and precautions
can be accessed at the following link: www.
mi.com/en/certification
Important Safety Information
Read all safety information below
before using your device:
• Use of unauthorized cables, power
adapters, or baeries can cause fire,
explosion, or pose other risks.
• Use only authorized accessories which are
compatible with your device.
• This device’s operating temperature range
is 0°C to 40°C. Using this device in an
environment outside of this temperature
range may damage the device.
• If your device is provided with a built-in
baery, to avoid damaging the baery or
the device, do not aempt to replace the
baery yourself.
• The baery must be recycled or disposed
of separately from household waste.
Mishandling the baery may cause fire or
explosion. Dispose of or recycle the device,
its baery, and accessories according to
your local regulations.
• Do not disassemble, hit, crush, or burn the
baery. If the baery appears deformed or
damaged, stop using it immediately.
- Do not short circuit the baery, as
this may cause overheating, burns, or
other injury.
- Do not place the baery in a high-
temperature environment.
- Overheating may cause explosion.
- Do not disassemble, hit, or crush the