Open the Mi Home/Xiaomi Home app,
tap "+" on the upper right, and then
follow the instructions to add your
device.
Note: If the QR code on the plug is not
available for scan, the plug can be added
by searching for its name. The version of
the app might have been updated,
please follow the instructions based on
the current app version.
The plug and its connected devices
must be paired to the same Xiaomi
Account for smart linkage.
* The app is referred to as Xiaomi Home
app in Europe (except for Russia). The
name of the app displayed on your
device should be taken as the default.
17
To Next Page
Loading...
