Xiaomi PB400 - User Manual

ZI5 Ni-MH Battery Charger
Thank you for your choice! Read the instructions carefully before using the
device.
Precautionary measures
Do not cover the device during charging.
Do not charge incompatible batteries.
For optimum performance, use ZI5 / ZI7 Ni MH batteries or Panasonic
eneloop Ni MH batteries.
Do not touch the device with wet hands.
Do not immerse the device in water, do not spray water or snow, do not
use it in a humid room (for example, in a bathroom).
Disconnect the device from a power supply after use.
In case of hit, falling or damage to the device, do not use it.
Do not disassemble or modify your device.
Do not use the device in direct sunlight.
Specications
Model: РВ400;
Input voltage: 5.0V / 1.0A;
Output voltage: 5.0V / 0.5A;
(AA) 1.5V AA: 550mA x 4;
(AAA) 1.5V AA: 225mA x 4;
Dimensions: 77 x 63 x 24.5mm;
Operating temperature: 0-40 ° С.
Overview of ZI5 Ni-MH Battery Charger
USB (output)
Micro USB (input)
Charge / discharge switch
Mode switch (Input - for charging the battery, Output - for charging external
portable devices)
LED indicators
Positive pole (anode)
АА Negative pole
(cathode)
ААА Negative pole
(cathode)

Xiaomi PB400 Specifications