Thank you for choosing Redmi Pad Pro Keyboard
This product is compatible with Redmi Pad Pro / Redmi Pad Pro 5G
For more compatibility information, visit our official website: www.mi.com/global/service/userguide
The product label information is printed
in the internal of the product bracket
USB Type-C Port
Power switch
Pairing and Charging
Pair your device and tablet using Bluetooth.
Charge your device with a USB Type-C charger.
For more information, visit our official website: www.mi.com/global/service/userguide
WEEE
Special precautions must be taken to safely dispose of this product. This marking indicates that
this product may not be discarded with other household waste in the EU.
To prevent harm to the environment or human health from inappropriate waste disposal, and to
promote sustainable reuse of material resources, please recycle responsibly.
To safely recycle your device, please use return and collection systems or contact the retailer where the device
was originally purchased.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO INSTRUCTIONS.
Additional safety information and precautions can be accessed at the following link: www.mi.com/en/certification
Important Safety Information
Read all safety information below before using your device:
• Input: 5V⎓500mA.
• Use of unauthorized cables, power adapters, or baeries can cause fire, explosion, or pose other risks.
• Use only authorized accessories which are compatible with your device.
• Aer charging is complete, disconnect the adapter from both the device and the power outlet. Do not charge the device
for more than 12 hours.
• This device’s operating temperature range is 0°C to 40°C. The storage temperature range of the equipment is -20°C to 45°C.
Using this device in an environment outside of this temperature range may damage the device.
• If your device is provided with a built-in baery, to avoid damaging the baery or the device, do not aempt to replace the
baery yourself.
• The baery must be recycled or disposed of separately from household waste. Mishandling the baery may cause fire or
explosion. Dispose of or recycle the device, its baery, and accessories according to your local regulations.
• Do not disassemble, hit, crush, or burn the baery. If the baery appears deformed or damaged, stop using it immediately.
- Do not short circuit the baery, as this may cause overheating, burns, or other injury.
- Do not place the baery in a high-temperature environment.
- Overheating may cause explosion.
- Do not disassemble, hit, or crush the baery, as this may cause the baery to leak, overheat, or explode.
- Do not burn the baery, as this may cause fire or explosion.
- If the baery appears deformed or damaged, stop using it immediately.
• User shall not remove or alter the baery. Removal or repair of the baery shall only be done by an authorized repair center
of the manufacturer.
• Keep your device dry.
• Do not try to repair the device yourself. If any part of the device does not work properly, contact Mi customer support or
bring your device to an authorized repair center.
• Connect other devices according to their instruction manuals. Do not connect incompatible devices to this device.
• Your device is not a toy. As with all electrical products, precautions should be observed during handling and using of
electrical products to reduce the risk of electric shock. If parents choose to allow children to use the device, they should
caution his or her child about the potential hazard while using and handling the device.
• For AC/DC adapters, the socket-outlet shall be installed near the equipment and shall be easily accessible.
Safety Precautions
• Observe all applicable laws and rules restricting use of device in specific situations and environments.
• Do not use your device in hospital operating rooms, emergency rooms, or intensive care units. Always comply with all rules
EN
01
To Next Page
Loading...
Need help?
General
