Installation Steps:（Only for XIEGU G90/X5105）
1. Connect the power cable to the power interface of G90 (supply voltage: 12V-16V, 100W/15.8V;
70W/13.8V...which can reach 100W. The average CW is 95W, the average SSB is 85W.)
2. Connect the input & output feeder B. One for connecting G90 to the amplifier, the other for
antenna and the amplifier (supply voltage: 15.8V, 2-10W signal input, 80-100W signal output).
To Next Page
Loading...
