Multifunctional Menu at the Bottom
1. SCOPE
SPAN: spectrum bandwidth selection
LEVEL: level selection
DISP: spectrum color custom settings
2. RADIO
MODEM: interface of modulator-demodulator
T/R EQ: transfer and receive EQ settings
DSP: digital signal processing function setting. The items to be adjusted can be selected
in the menu. Continuously clicking an item, you can switch multiple adjustment items of
the item.
SYSTEM: system setting. The operation method is the same as above.
*Note that to exit the menu, you shall click the exit button in the menu.
Wiring the Host and GSOS
Power supply: Whether it is connected to G90 or X5105, an external power supply is
required to power the GSOC separately. The host is unable to provide sufficient power.
Supply voltage range: 11~14V DC
The external DC power port is on the right side.
Hand microphone: Insert it into the hand microphone port on the right side.
IF signal: Connect it to the IF input port on the right side
Left side: Provide two USB ports and TF card socket
Back side:
REMOTE: It is used to connect G90 host
SP/PH: earphone speaker shared port. (Do not connect the earphone for now because the
volume will be loud)
I/Q: to connect the IQ signal output by the G90 host.
The speaker window is at the windowing location on lower left side of the back.
To Next Page
Loading...
Need help?
General