10 / 12
Then press the corresponding number keys on the microphone to set the local time.
3.3.20: Setting squelch level
Press the frequency knob to switch the current menu page, then press [SQL].
Turn the frequency knob to set the squelch depth. Press [SQL] again to save the squelch
setting and exit.
3.3.21: Set voice (speech) compression ratio
Press the frequency knob to switch the current menu page, then press [VCMP]. Adjust the
compression ratio as desired.
3.4 Extended Interface
【ANT】Antenna 50 ohms
【AUX】Auxiliary; PTT/Audio Input
PTT output voltage status:
RX=0V; TX=5V
【SPK】Speaker or Headphone(3.5 stereo Socket); Otherwise it will damage the rig. Before
using the headphone, please decrease the volume.
To Next Page
Loading...
