XIEGU X108 - Machine Parameters; Basic Parameters; Transmitter Parameters; Receiving Parameters

3 / 12
一、Machine parameters
Basic parameters
Frequency range: Receive: 0.5~30MHz
（
Continuous
）
Transmitting: All HF Amateur bands including WARC bands
Operating mode: SSB（J3E）
CW （A1A）
AM （A3E）
minimum frequency stepping: 1Hz
Antenna impedance: 50Ω
Operating temperature range: -10℃ ~ +60℃
Frequency stability: ±1.5ppm @ Open the power about 1 minute，-10℃~+60℃（Standard Edition）
±
0.5ppm @ Open the power about 1 minute , -10
℃
~+60
℃（
TCXO-M
，
Matching
）
Operating voltage: 12~14.5V DC
Current draw: Receiving: 600mA
Transmitting: 7.5A Max
Dimensions (mm): 120*45*180（mm） [Does not include the Front and rear handles and the Knob etc bulge.]
Transmitter parameters
Transmitter power：
Modulation mode: SSB balanced modulation:
AM Low level modulation
Spurious response rejection: ≥40dBc
Carrier suppression： ≥45dBc
IF filter： SSB 2.4kHz(-6dB)
CW 500Hz(-6dB)
Receiving parameters
IF Frequency: 10.7MHz
receive sensitivity: 0.2uV
Receive Frequency bands: 1.8~2.0MHz
3.5~4.0MHz
5.0~5.5MHz
7.0~7.3MHz
10.0~10.2MHz
14.0~14.5MHz
18.0~18.2MHz
21.0~21.6MHz
24.8~25.0MHz
28.0~28.8MHz
0.5~30.0MHz （*）
Dynamic range: Better than 95db
RIT Frequency control range: ±1kHz
audio output: 0.5W@8Ω