Operation
16
10 RIT
RIT selected/not
selected
Cycle
RIT value zeroing (no matter whether
RIT is selected or not)
11 V/M
Switch VFO/MEMO
mode
Cycle
write current MEMO parameters in VFO
and return to VFO mode if under MEMO
mode
12 <
VFO mode: move frequency stepping
position to left
MEMO mode: last channel
Execute short press operation continuously
Interval is about 0.1s
Until loosening the key
13 >
VFO mode: move frequency
stepping position to right
MEMO mode: next channel
Execute short press operation
continuously
Interval is about 0.1s
Until loosening the key
14 A/B
Switch VFO A/B
Cycle
Copy foreground VFO parameters to
background VFO
15 ATU
Cycle of ATU bypass/access
switch
Start ATU
Enable access state after
adjustment
16 PO
Cycle of output power
selected/not selected
Set SWR protection threshold
17
LOCK
Cycle of switch displayer
backlight level (6 levels)
Keys and thumbwheel on lock panel
To Next Page
Loading...
