XIEGU X5105 - Received Frequency Fine-Tuning (RIT); Enabling and Adjusting RIT; Resetting RIT Deviation

Operation
43
Fine tuning of received frequency (RIT)
RIT function can set the deviation
value of actual receiving frequency
corresponding to set frequency, that is
±1.5kHz at maximum.
Operation methods:
1. Press [RIT] key in a short time to enable
RIT function. There will be a △F icon on
screen;
2. Rotate knob to make the frequency of
receiver changes within ±1.5kHz, and the
changed value of frequency will be
displayed in relevant area on screen.
3. If RIT deviation value has to be reset,
press and hold [RIT] for about 2s to reset the
value set by RIT. Meanwhile, AF icon will
disappear.
X5105
T/R DATA LINK
LOCK
PRE
ATT
MODE
MENU
V/M
A/B
NB
RIT
ATU Po
<
Fine tuning
of
frequency