XIEGU X5105 - Automatic Gain Control (AGC); AGC Mode Selection and Recommendations

Operation
44
Automatic gain control (AGC)
Receiving effect can be optimized by adjusting proper AGC speed.
Operation methods:
1. Switch to menu in page 1 and press [AGC] functional key in a short time;
2. AGC functions will be circularly selected according to following sequence:
OFF—SLOW—FAST--AUTO
3. Optimal effect will be obtained by reasonably selecting different AGC speed according to different receiving modes.

SSB/AM mode: SLOW is recommended

CW mode: FAST if recommended

If AUTO is selected, main machine will be automatically switched to a corresponding control speed according
to different modes.

If 'AGC-OFF' is selected, AGC system will be closed and S meter will display nothing.