XIEGU X5105 - System Parameter Configuration; Accessing and Adjusting System Settings

Operation
54
System parameter configuration
Personalized settings can be achieved for transceiver in system settings menu to make it fit your using habit in a
better way.
Operation methods:
1. Press and hold [MENU] key for 1s to enter system settings menu;
2. Press [<] and [>] multi-function keys at the bottom of screen to call out the menu items you want to adjust;
3. Rotate major knob to set parameters you wanted;
4. Press [SAVE] key in a short time to save current settings and exit menu mode after setting.

If pressing [QUIT] key in a short key in step 4 mentioned above, new settings will not be saved and the
equipment will exit menu mode of the system.
Descriptions of system menu
Menu items
Function description
Settable values
Default
#1
LCD Backlight
Displayer backlight brightness
OFF～LEVEL5
LEVEL5
#2
LCD Contrast
Displayer contrast ratio
0～30
30
#3
BEEP Volum
System prompt volume
0～100
50
#4
CW Tone Volum
CW sidetone volume
0～100
50
#5
Key BEEP
Key prompt tone
OFF/ON ON
#6
AM Mod Level
AM transmission modulation degree
0～63
60