Xinje VH6 Series - Page 135

129
Parameter
Name
Range
1: stop as stop mode
Thousands bit: output load drop (Err19)
0: free stop
1: stop as stop mode
Ten thousand bit: pole position detection
failed (Err21)
0: free stop
1: stop as stop mode
P7-46
Protection action 2 when fault
Ones bit: external fault 1 (Err43)
0: free stop
1: stop as stop mode
Tens bit: communication error (Err44)
0: free stop
1: stop as stop mode
Hundreds bit: EEPROM read write error
(Err45)
0: free stop
1: stop as stop mode
Thousands bit: operation time reached
(Err46)
0: free stop
1: stop as stop mode
Ten thousand bit: power on time reached
(Err47)
0: free stop
1: stop as stop mode
P7-47
Protection action 3 when fault
Ones bit: user defined fault 1 (Err48)
0: free stop
1: stop as stop mode
Tens bit: user defined fault 2 (Err49)
0: free stop
1: stop as stop mode
Hundreds bit: PID feedback lost in operation
(Err50)
0: free stop
1: stop as stop mode
Thousands bit: speed deviation too large
(Err52)
0: free stop
1: stop as stop mode
Ten thousand bit: motor over speed (Err53)
0: free stop
1: stop as stop mode
P7-48
Protection action 4 when fault
Ones bit: motor overheat (Err54)
0: free stop