34
P8-05 is used to control the display of user defined group and user modified group parameters.
Basic function codes
The basic function code group is the whole function code of the inverter. After entering, it is the level I menu.
Please check them according to the operation mode described above.
User defined function codes
The user defined menu is easy to check the general parameters. The display form of parameters in the
user-defined menu is like "uP0.01", which represents the function parameter P0.01. The effect of modifying
parameters in the user-defined menu is the same as that in the normal programming state.
The function parameters of user-defined menu come from group PE. If the function parameters are selected by
group PE, and set to P0.00 means that they are not selected, and a total of 32 can be set. If "null" is displayed
when entering the menu, it means that the user-defined menu is empty.
Users can customize and edit according to their specific needs.
User modified function codes
In the group of function codes that have been changed by the user, only the current set value is listed. This is a
list generated automatically by the frequency converter, which makes it easy for users to quickly access the
modified function code.
To Next Page
Loading...