Xinje XS Series - Page 15

5
XSLH series PLC built-in clock for time control
 Easy to install
XSLH series PLC is easy to install, which can be directly installed by guide rail or fixed with M3
screws.
Enhanced special functions
 EtherCAT bus
XSLH series PLC supports EtherCAT bus communication, supports up to 32 stations (32-axis motors
can be controlled synchronously), and supports communication with EEPROM slave stations, such as
Xinje-DS5C, Inovance servo, Panasonic EtherCAT servo, Kollmorgen servo, etc.
XSLH series PLC supports 32-channel electronic cam function and connection of EtherCAT remote
IO module through EtherCAT bus.
 CANopen bus
The physical layer of CAN bus is very stable. The data link layer is reliable, flexible, highly
compatible, and highly interoperable. It supports a maximum of 16 stations (16-axis motors can be
controlled synchronously).
 Ethernet communication
XSLH series PLC supports Ethernet communication, which can realize faster and more stable
program / data download and better real-time performance. It supports PLC access to the Internet, and
realizes remote search, online monitoring, uploading and downloading of PLC program.
 High speed pulse counter, up to 200KHz
The basic unit of XSLH series PLC supports 2-channel OC signal and 2-channel differential signal
input, and can count in single-phase and AB phase modes. The differential model can be up to 1MHz,
the single-phase can be up to 80KHz, and the AB phase can be up to 50KHz.
 Interrupt function
XSLH series PLC has 10 channels external interrupt function.
 Online downloading
XSLH PLC supports online download function, which truly realizes PLC non-stop operation.
 Simulation
It supports simulation without connecting hardware, which is helpful for programming.
 Dial switch
Used to initialize IP, power on without loading user program, normal startup, no special processing,
loading user program, and updating the product.
(3) Easy programming
XSLH series PLC is programmed in Codesys programming software. Please refer to XS series PLC user
manual [software] for specific use.