23
3-2．Peripherals
The use of basic units of XSDH, XSLH and XS3 series PLC involves a variety of peripheral devices.
3-2-1．Programming software
In Codesys programming software, functions such as writing or uploading programs to XS series PLC,
real-time monitoring PLC operation, configuring PLC, etc. can be realized.
Software interface
3-2-2．HMI
The HMI is an interactive interface between PLC and operators. The HMI can easily and quickly send the
operator's instruction to the PLC, and then the PLC executes the action.
The basic unit of XS series PLC supports the connection of various HMI. The connection is established on the
basis of consistent communication protocols, generally through Modbus TCP protocol. The specific parameters
depend on the HMI connection.
The HMI of Xinje company can be directly connected with the basic unit for communication (the
communication parameters have been consistent). At present, Xinje HMI products are divided into touch screen
TG series and text display OP series.
(1) TG series
Size: 4.3”, 7”, 8”, 10.1”, 15.6”
Display: 16.77 million colors, 65536 colors
Operation: touch operation in display area
Interface: RS232, RS422, RS485, USB, RJ45
Communication: it can communicate directly with Xinje frequency converter, various PLCs,
frequency converters and instruments. Direct drive panel printer, supporting multiple printers.
Equipped with two ports, which can connect two different devices at the same time.
Support free format protocol, and users can freely write drivers.
To Next Page
Loading...