Xinje XS Series - 4. Power Supply Specification; 4-1. Power Supply Specification

31
4. Power supply specification
4-1. Power supply specification
The power specification of XSDH series PLC only supports AC power type.
The power specification of XS3 series PLC only supports DC power type.
The power specification of XSLH series PLC only supports DC power type.
(1) AC power type
Item
Content
Rated voltage
AC100V~240V
Voltage allowable range
AC90V~265V
Rated frequency
50/60Hz
Allowable instantaneous
power off time
Interrupt time ≤0.5AC cycle, space ≥1s
Impact current
Max below 40A 5ms/AC100V max below 60A 5ms/AC200V
Maximum power
consumption
30W
Power supply for sensor
24VDC±10% max 400mA
Note:
※1: Please use more than 2mm
2
wires for power cables to prevent voltage drop.
※2: Even in case of power failure within 10ms, the programmable controller can still continue to work. When the
power is cut off for a long time or the abnormal voltage drops, the programmable controller will stop working and the
output will also be in off state. When the power supply is restored, the programmable controller will automatically
start running.
※3: The grounding terminal FG of basic unit and expansion module can be connected with each other and reliably
grounded (the third kind of grounding).
(2) DC power type
Item
Content
Rated voltage
DC24V
Voltage allowable range
DC21.6V~26.4V
Input current (basic unit)
120mA DC24V
Allowable instantaneous
power off time
10ms DC24V
Impact current
10A DC26.4V
Maximum power
consumption
12W
Note: ● terminal is empty, please do not use it as external wiring or relay terminal.