Xinje XS Series - 5-1-3. XSLH Series Input Specification

34
2-wire (NO or NC) proximity switch wiring diagram 3-wire (NPN type) proximity switch wiring diagram
(2) Differential mode
Item
Content
Input signal voltage
DC5V±10%
Input signal current
12mA/DC5V
Input ON current
Above 4.5mA
Input OFF current
Below 1.5mA
Input response features
Max 200KHz
Input signal mode
Differential input
Circuit insulation
Optoelectronic coupling insulation
Input action display
LED lights when input is ON
Differential input wiring example:
Differential wiring diagram example
5-1-3．XSLH series input specification
XSLH series PLC supports NPN and differential input modes. The specific specifications and wiring mode are
described below:
(1) NPN mode
Item
Content
NPN input points
12 points (X2, X5~X15)
High speed counter input
4 points (X6, X7, X11, X12), single phase 80KHz, AB phase 50KHz
Input signal voltage
DC24V±10%
Input signal current
7mA/DC24V
Input ON current
Above 4.5mA
Input OFF current
Below 1.5mA
Input response time
About 10ms
Input signal mode
Contact input or NPN open collector transistor