Need help?Do you have a question about the XITONG GT06 and is the answer not in the manual?
General| Network | GSM/GPRS |
|---|---|
| GSM Frequency | 850/900/1800/1900MHz |
| GPS Sensitivity | -159dBm |
| SOS Button | Yes |
| Geo-fence | Yes |
| Battery | Rechargeable lithium battery |
| Tracking Technology | GPS |
| Dimensions | 45mm |
The power cable for connecting the device to the vehicle's power source.
Documentation detailing the steps for installing the GPS tracker.
Optional accessory for audio monitoring and two-way communication.
Optional button to trigger emergency SOS alerts and calls.
Optional component for remote engine cut-off functionality.
Supports GPS for location tracking and GSM (850/900/1800/1900MHz) for communication.
Operates on a wide input voltage range of 8-50VDC or 8-100VDC.
Enables vehicle tracking through SMS and GPRS data transmission.
Allows users to track the vehicle's location via a mobile phone interface.
Detects ACC ignition signals to report the vehicle's operational state.
Features an integrated vibration sensor for intelligent anti-theft capabilities.
Allows setting specific numbers for SOS and security alarms.
Dedicated SOS switch for initiating emergency calls for help.
Supports internal/external microphones and speakers for remote audio monitoring and voice intercom.
Includes a backup battery to alert against illegal wire cutting.
Steps for selecting, installing, and configuring the SIM card, including network and PIN settings.
Recommendations for hidden installation, avoiding interference sources, and secure fixing.
Instructions for optimal antenna orientation and placement to ensure signal reception.
Explains the function of each wire: positive, negative, ACC, and oil cut-off relay.
A visual guide illustrating the connections for the device's wiring harness.
Outlines the sequence of Installation, Power, Settings, and Registration for device use.
Details the meaning of the Red, Yellow, and Blue LED indicators on the device.
How to set or change the owner password and bind a phone number for control.
Adding, deleting, and querying specific numbers for SOS alerts.
Enables/disables SMS and phone call alerts for power disconnection.
Settings for ACC status triggering anti-theft and alarms.
Controls vibration alarms via SMS or phone calls, including duration.
Turning on/off SOS alarm messages and calls.
Command to enable remote monitoring of vehicle status by calling the device.
How to use the two-way voice communication feature for assistance.
Retrieves the device's current location using SMS commands.
Sets up SMS notifications for exceeding a defined speed limit.
Configures alerts when the vehicle moves from its parked location.
SMS commands for arming and disarming security features.
Commands to remotely stop or restore vehicle oil and power.
Command to restart the GPS module for troubleshooting.
Command to reset the device to its original factory default settings.
Command to restart the entire device.
Command to retrieve the device's current operational information.
Steps to configure APN, username, and password for GPRS connection.
Command to set the server IP address and port for data transmission.
Details on real-time monitoring, track playback, and report statistics.
Checks for power wiring and backend server connectivity problems.
Verifies SIM card installation and power switch status.
Interprets LED indicators and ensures GPS has acquired a fix.
Steps to diagnose why the terminal is offline, checking SIM, network, and GPRS.
Addresses issues with acquiring a GPS fix, including environmental factors.
Troubleshoots alarm messages and power issues, including fuse checks.
Notes on product changes and how to get support via email.
To Next Page