XLT Ovens SmartSolution 1832 - Warranty - International; Duties of the Owner; What is Not Covered; Claims Handled as Follows

Warranty – International
Rev L Approval Date: 06/01/2020
7761 W Kellogg Drive 67209-2003 - PO Box 9090 67277-0090 - Wichita, Kansas
Voice (316) 943-2751 - (888) 443-2751 - Fax (316) 943-2769
www.xltovens.com
XLT warrants Version H ovens manufactured aer October 16, 2019 to be free from any defect
in material and workmanship under normal use for ve (5) years from the date of original purchase by
the end user, and further warrants main fan blades, conveyor shas, and conveyor bearings for ten (10)
years. XLT further warrants all ovens/hoods to be free from rust for ten (10) years from the date the
equipment is originally purchased. XLT warrants Version E hoods manufactured aer October 16, 2019
to be free from any defect in material and workmanship under normal use for ve (5) years from the
date of original purchase by the end user purchaser. If the purchase includes a hood and the ovens both
the warranty will be increased to seven (7) years on both pieces of equipment. In the event of a part
failure, XLT will furnish a replacement part and pay for all labor associated with the replacement of the
part. If upon inspecon XLT determines that the part is not defecve, all incurred costs will be the
responsibility of the end user purchaser. This warranty is extended to the original end user purchaser
and is not transferable without prior wrien consent of XLT. Damages are limited to the original
purchase price.
DUTIES OF THE OWNER:
 The owner must inspect the equipment and crates at me of receipt. Damage during shipment is to
be immediately reported to the carrier and also to the Distributor/Service Provider
 The equipment must be installed and operated in accordance with the Installaon and Operaon
Manual furnished with the unit
 This warranty shall not excuse the owner from properly maintaining the equipment in accordance
with the Installaon and Operaon Manual furnished with the unit
 A copy of the “Inial Start-Up Checklist” must be lled out and returned to Distributor/Service
Provider and to XLT when the unit is inially installed, and/or when the unit is removed and
installed in another locaon
 The gas, electric, and HVAC ulies must be connected to the oven and installed by locally licensed
contractors
 Failure to contact the Distributor/Service Provider prior to contacng a repair company for warranty
work voids any and all warranes
WHAT IS NOT COVERED:
 Freight damage
 Overme charges
 Any part that becomes defecve because of ulity services (power surges, high or low voltages, high
or low gas pressure or volume, contaminated fuel, or improper ulity connecons)
 Any part that becomes defecve because of moisture and/or other contaminants
 Conveyor belts
 Filters
 Exhaust Fans
 Light Bulbs
 Painted or Powder Coated surfaces
 Normal maintenance or adjustments
 This warranty shall not apply if the equipment or any part is damaged as a result of accident,
casualty, alteraon, misuse, abuse, improper cleaning, improper installaon, improper operaon,
natural disasters, or man-made disasters
CLAIMS HANDLED AS FOLLOWS:
 Should any such defect be discovered, the Distributor/Service Provider must be noed. Upon
nocaon, Distributor/Service Provider will arrange for necessary repairs to be made by an
authorized service agent. Denial of services upon the arrival of an authorized service agent will
release XLT and Distributor/Service Provider of any and all warranty obligaons.