XLT Ovens X3F3-1832 Series - Hood Cleaning; Hood Cleaning Schedule

Technical Support US: 888-443-2751 Technical Support INTL: 316-943-2751
97
HOOD CLEANING
Your AVI hood is constructed of stainless and aluminized steel. Check application restric-
tions on product label prior to usage. Observe recommended precautionary and safety measures as
dictated by the product manufacturer.
Do not use abrasive or caustic cleaners. Abrasive pads will scratch stainless steel surfaces.
Areas with heavy buildup should be sprayed and allowed to soak for up to 5 minutes prior to wip-
ing clean. Always wipe with the “grain” of the surface to maintain appearance.
Shroud Panels can weigh up to 60 lbs [27 kg]. Use caution when lifting.
Schedule provided as a guide only. Frequency of cleaning may vary as needed.
DO NOT spray liquid cleaning agents in the following locations:
 Hood electrical box (located on front of upper portion)
 User Interface (Located on front lower right corner)
Oven must be cool and the electric cord unplugged before any cleaning is done.
Refer to the Hood Installation Section for disassembly and reassembly.
CAUTION
CAUTION
DANGER
Cleaning
Wipe down Front, Sides, & Top
□
Clean Light Globes
□
Empty & Clean Grease Trays
□ □
Clean or Replace Fan Filter
□ □
Clean Grease Filters
□ □
Clean Duct and Exhaust Fan
□ □
Inspection
Check Grease Trays
□
Check Grease Filters
□
Adjust
No Adjustments Necessary
Lubricate
No Lubrication Required
Replace
Fan Filter
□
Light Bulbs
□
Hood Cleaning & Maintenance Schedule
Daily
Weekly
Monthly
Semi-
Annual
As Required