Technical Support US: 888-443-2751 Technical Support INTL: 316-943-2751
90
HOOD OPERATOR CONTROLS
Factory Tech Mode
To enter Factory Tech Mode press and hold the Hood Lights button and the XLT Logo for ten (10)
seconds.
Software Version
MC & UI Software Version. Press Down arrow to go to next screen.
Image For Reference Only - See XLT For Correct Version.
Serial Number
ENTER button to make changes. Use side to side arrows to scroll to next character
position. Use Up/Down arrows to change values and press ENTER to accept and ad-
vance.
Belt Length
Press ENTER to make changes and use arrows Up/Down to adjust. ENTER to accept
and advance.
Belt Width
Press ENTER to make changes. Use Up/Down arrows to adjust. ENTER to accept and
advance.
Elapsed Time
Elapsed time of total operating hours. Elapsed time total cannot be reset. Press Down
arrow to advance.
Cooling Filter
Elapsed time since Cooling Filter last cleaned. Reset by customer or service tech after
cleaning. Press the Error Information button to reset time if needed. Hour Interval is a
service tech reference. Press Down arrow to advance.
Grease Filter
Elapsed time since Grease Filters last cleaned. Reset by customer or service tech after
cleaning. Press the Error Information button to reset time if needed. Hour Interval is a
service tech reference. Press Down arrow to advance.
To Next Page
Loading...
