XOOFER Rock 7720 User Manual

Hi-Fi Bluetooth Speaker
RS7720
User manual
To Our Valuable Customer Key and Connecon Turn ON/OFF and Bluetooth pairing funcon
Funcon Descripon
Safety
Connect to Bluetooth devices
Trouble shoong
Other play back feature
Trouble shoong
Package Accessories
Thank you for choosing our Wireless portable speaker.
This model uses a high capacity Polymer Lithium baery,with the super
low bass
And also comes with noise reducon technology,
It is compable with most of the Bluetooth frequency and support A2DP.
So that you can enjoy the pure HIFI sound quality and it has build in
microphone wireless Bluetooth funcon.Please read the menu carefully
before uses the unit and keep the menu in a safe place.
1. Do not turn the volume to the maximum level,because it may harm to
the hearing.
2. Keep unit away from the moisture environment,sand or other
electronic devices.
3. Use the wet cloth to clean up this product,but do not use alcohol,
winde.
4. The unit was charged 50% of baery on the producon line.In order
to maintain the baery life,it requires charging the baery in full before
use the product.
1. About the charging indicator light
a. Charge to 25%-50%,25% the
corresponding indicator turn into a
constant ligh;50%,the corresponding
indicator is flashing.
b. Charge to 50%-70%,50% the
corresponding indicator turn into a c
onstant ligh;75%,the corresponding
indicator is flashing.
c. Charge to 75%-100%,75% the
corresponding indicator turn into a
constant ligh;100%,the corresponding
indicator is flashing.
Previous blue indicator show: wireless
audio connecon device,wireless Bluetooth
connecon device that could only connect
to the previous Bluetooth device (Mobile
phone).
Previous indicator blue and red flashing
show: wireless audio connecon device,
wireless Bluetooth connecon device is
reboong.
Previous red indicator show: Charing
1. Hold ON/OFF,unl a “Dong” sound, blue indicator,Bluetooth speaker
could connect to the previous connected device.
Aer reboot,press ON/OFF momentarily, unl a “du” sound, blue and
red flashing,the state of Bluetooth pairing,and the mobile phone can pair
with HI-FI now.
2. At sate of power on,hold ON/OFF,unl a “dong” sound,red indicator,
power off
3. At the state power on,Bluetooth connecon (play),all of a sudden call,
end play music self-moon,turn to be calling prompt,press phone key
momentarily pick up,the microphone work.Press phone key
momentarily 2 mes,redialling the last called.Press the Phone key,hang
up,turn to play. Calling,end play music self-moon,turn to call prompt,
hold Phone Key 1s,reject call,turn to play.
4. Hold Increase volume buon,the voice become louder and “dong
dong dong…” Indicator when reach the loudest.Hold decrease volume
buon,the voice become smaller,and reach the lowest when “dong
dong dong” showed.
5. Turn to play next song when press increase volume momentarily:
Press decrease volume momentarily to play previous song.
6. The voice of speaker can be control by Mobile phone or Bluetooth
device.
① Indicator ② Phone ③Decrease Volume/Move to Previous
④ON/OFF ⑤Increase Volume/Move to Next
⑥Headphone Jack ⑦Play or Pause
1
2
3
7
4
6
5
d. Charge to 100%,the four indicators all constant light.
2. About the power indicator light (power indicator switch)
Press switch on,the indicator show the power:
When power over 75%,the four indicators light on.And so on,the
product is standard charge cable (USB-A interface-USB-A interface).
25%
50%
75%
100%
7. If you hear the “du du du du…”Indicator,the baery is low and
requires charging of the device.
In order to maintain the power of rechargeable baery last longer,you
need to charge and discharge baery every 3 months,even you do
not use it.
There are many applicable Bluetooth devices in the market,we show
IPHONE as a demon straon below:
*You may require password,if needed,please input 0000.
*Always follow operaon guidance on the phone.
If you want to connect a new Bluetooth connecon,you must make sure
the Bluetooth in the state of pairing standby mode,and the AUX interface
do not connect any audio device.
1. Hold Bluetooth funcon buon for a few seconds unl previous
indicator red and blue lights flashing
2.Open IPHONE
3.Follow the steps to acvate the IPHONE Bluetooth funcon:
Open set up menu
Choose the regular menu-Bluetooth
Set up the Bluetooth open on state
IPHONE begin to search and obtain the Bluetooth device on the list;the
speaker is named S7720 on the list of Bluetooth device,the state is
without paired,without connecon.
4. Open the matching connecon.Iphone viewing screen will indicate
connected,the previous indicator blue start flashing slowly.At this me
could start playing music,for example,the funcon operaon on Iphone
could transfer to speaker.
If set up the sound to halt condion in careless,only if open the power,
Bluetooth reacvaon and the paired Bluetooth devices are in the work
range,the speaker will connect the last connecon device automac;
Previous indicator will red flash for a short me.Once the speaker is
reconnecon successfully,previous indicator turn to blue.
*If the LINE IN interface of speaker have audio connected device,speaker
will default voice frequency first play.this me,Bluetooth device be
disconnected,unless remove LINE IN connecon,otherwirse the
transmission could not recover.
Play music
The speaker could play all different formats that your device supported.
It also support new A2DP standard format.At present,there are lots of
devices could be supported by mobile phone,which is special researched
and developed for transfer wireless stereo signal device by Bluetooth.
You may need manual acvaon for your smart mobile phone’s
transmission that should transfer by A2DP. For this,you can refer to
the relevant guidelines of your smart mobile phone to gain the more
informaon.
Base on the issue of versions on smart mobile phone,someme,it may
not play music directly.Under the circumstances,you need operate by
hands,and then you could pause or replay the music in any device.
1. Start the music playing
2. Turn on the relevant funcon of your smart phone to play.
3. In the situaon of Bluetooth connected and playing:
Stop Playing,press Pause buon momentarily,the music pause.
Resume play,press Pause buon momentarily again,the music play.
4. Volume Control
Hold on the Increase Volume buon,the sound gradually louder,ll have
a voice “Dong Dong Dong…”,reach the loudest.Hold on the decrease
volume buon,the sound gradually smaller,ll have a voice “Dong Dong
Dong…” reach the smallest.
5. Conversaon
It could use as a hands-free device,build-in microphone.
Pick up call
The music will automacally disconnect when there is an incoming call,
and the phone ringing transfer to speaker.
Pick up call: press phone buon momentarily,the phone will transfer to s
peaker,you can use the internal microphone to hands-free conversaon.
You could choose in your smart phone to pick up phone by speaker or
phone.
6.Hung up or reject call
When there is call,hold phone buon to hang up.
You could connect your phone which is without Bluetooth funcon to
speaker device directly,but you need have an audio cable that both ends
with 3.5mm diameter of the plug.
Please follow your phone operaonal guideline to operaon.
As to through LINE IN connecng base to connecon’s device,you can
only use the volume control of audio device (As mobile phone) to
control the volume,and the start and stop of music could only be
controlled by audio device.
Can’t operate in the normal condion
1. 1s that enough baery power? Connect the unit to the computer
by USB cable
2. 1s that power off or stay on standby mode? Turn on the device and
pairing it again
3. 1s that within the receiver distance? Move devices close to the device
Can’t connect with Bluetooth
1. Did the Bluetooth compable with the cell phone? Refer to cell
phone menu for more informaon
2. Did the Bluetooth acvate from the cell phone? Turn on the
Bluetooth funcon from the cell phone and confirm the pairing is
successfully from the device. Otherwise, refer to the page 4” connect
to Bluetooth device”
3. Did the pairing password been enter? Check and confirm with devices
Cannot play music
1. Did the device have the playback soware? Refer to the device menu
and follow the instrucon on playback music opon
2. Did the playback set on pause mode? Press the play/pause buon
from RS7720
3. If the volume of play device is too low
4. Did the volume adjust too low or on mute on the device and the
TOP-X6?
5. Did the LINE IN input been connected? The Bluetooth playback will
stop if the LINE IN input connected
6. Did the baery in low condion? Charging is required
Play back stop
Check baery condion, charging required if the baery low
1. Use a suitable audio cable,one end connect to mobile phone
headphone output hole,and the other one end connect to LINE IN
connecng seat of speaker.
2. Turn on the speaker and mobile phone.
3. Click on the audio device to play music.
4. Control the volume in Audio device.
*Please turn off them before disconnect speaker and audio device.
-1- -2- -3- -4-
-5- -6- -7- -8-

XOOFER Rock 7720 Specifications

General

Brand	XOOFER
Model	Rock 7720
Speaker Type	Portable Bluetooth Speaker
Output Power	20W
Frequency Response	80Hz - 20kHz
Bluetooth Version	5.0
Connectivity	Bluetooth, AUX
Configuration	Single Speaker
Bluetooth Range	10 meters
Features	Built-in microphone, TWS pairing