Automatic Radio Station Search
Select the "DAB +" mode, long press the Tune+ button on the front of the unit. The automatic station search is started. During the search process, the display on the right side will
show you the radio stations already found. The progress bar on the bottom lets you see how far the search has progressed.
Select the "FM" mode, briefly press the Tune+ button on the front of the unit to start the automatic station search. The device will search automatically until a high-frequency station
is found.
Manual Radio Station Search
Use the "DAB +" mode, then press the Tune+ button on the front of the unit to select from the available radio stations. Pressing the Tune+ or Tune- key calls up the previously selec-
ted radio station.
Use the "FM" mode, then press the Tune+ button on the front of the unit to scan individual frequencies. This feature may help you find less-listening radio stations. Normally, the
automatic station search is the simplest and most effective. If you press the Tune+ button for longer, the automatic search will be activated until the next radio station is found.
Presets
The device offers a station memory, with which you can store up to 10 of your favorite stations. By pressing the Preset 1 button, you can quickly call up your favorite station at any
time. Presets 1-10 can be accessed by briefly pressing the Preset 2+ button and then using the Tune + or Tune- buttons to select the desired number.
Start a channel scan until you are on a radio station that you would like to permanently store in the station memory. Press the Preset 1 button on the front of the device for a long
time until "Save" appears on the display. By pressing and holding the Preset 2+ button, you can store more stations. Select the desired memory location by pressing the Tune+ or
Tune- buttons. Confirm with the Enter key to save the station.
Alarm Function
The device offers an alarm function. Press the Alarm/Back button to call Alarm 1 and press the Alarm/Back button again to select Alarm 2. The individual options can be reached by
pressing the Tune+ button. Confirm by pressing the Enter key. You can define the alarm time, select the alarm sound (source, here also DAB + or FM radio selectable), define the
repeat (daily, once, weekdays, weekends), adjust the volume and activate the alarm "alarm on" or deactivate "alarm off ".
If the alarm is active, a bell icon appears on the display when the unit is in standby mode. When the alarm time arrives, the unit will switch according to your alarms.
Note: The alarm function is only possible when used with the power supply!
6 User Manual
To Next Page
Loading...
