EasyManuals Logo

XP Metal Detectors Deus V4 User Manual

XP Metal Detectors Deus V4
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
General use.
Similar settings to the XP Gold Maxx Power detector, powerful and fast.
More selective with small targets on iron-infested eld and deeper on
mineralised ground
Responsive pitch that varies in frequency and amplitude according to
the signal’s strength.
Medium speed, particularly eective for large masses and highly conductive
coins.
Pro setting for locating deep targets, with moderate discrimination and
specic signal processing
Wet beaches, although in situ adjustments are needed for the ground
eect, either by pumping or manually adjusting. (pg 13).
Suitable for dry sand.
HOT «The Pro setting» this is a nd everything program,based on the Full
Tone audio mode with a very low discrimination. Hot is a very interactive
program oering excellent feedback and target information.
GOLD FIELD uses another detection method designed for searching
highly mineralised ground which is often where gold nuggets are
found. In these conditions, targets can be seen as ground mineralisa-
tion or ferrous objects, especially when they are deep. To go deeper in
these dicult conditions, the "Gold Field" program uses a true All Metal
mode that allows you to accept a zone of ground that is usually not
available. Instead of rejecting all the ground values below a predened
value (as on conventional detectors), it rejects only the specic value
of ground in which you are searching, which means you have to adjust
precisely. To facilitate the ground balance (essential in this program),
*pressing will make an immediate acquisition of the ground value
within one or 2 pumps of the coil.
In this program certain settings are not active or are replaced by the
another specic setting such as:
- The IAR discrimination (Iron Amplitude Rejection): A range of
discrimination that can be applied from 0 to 5. It applies only to targets
that produce strong signals – typically shallow ferrous items. It will
not reject deeper targets which may come across as ferrous when
they are buried in mineralised ground to ensure good targets are
notrejected by mistake.
* Immediate acquisition of the ground value (Grab) is performed simply
by pressing (while pumping the coil to & from the ground).
The digital target display is active, this allows the operator to
work in All Metal mode with a visual recognition (valid on shallow targets).
06
1 - BASIC
2 - GM POWER
3 - DEUS FAST
4 - PITCH
5 - G-MAXX
6 - DEEP
7 - WET BEACH
8 - DRY BEACH
9 - HOT
10 - GOLD FIELD
FACTORY PROGRAMS

Other manuals for XP Metal Detectors Deus V4

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the XP Metal Detectors Deus V4 and is the answer not in the manual?

XP Metal Detectors Deus V4 Specifications

General IconGeneral
BrandXP Metal Detectors
ModelDeus V4
CategoryMetal Detector
LanguageEnglish

Related product manuals