10
4. Customize: Manually enter coordinates in the corresponding input boxes below X, Y, W and
H to customize the size of the device’s work area, or use the stylus to drag on the device icon
on the driver interface to set the size of the device’s work area.
Rotation setting:
You may set the device to 0°, 90°, 180° & 270°. After finishing the setting, you also need to
rotate the device in the corresponding direction.
Rotating 180° means to change to the left-handed mode.
ii Application
Customize all keys’ functions and adjust pressure for different applications on the current device.
When switching between different applications, the driver will be identified automatically. Once
all applications selected, the function works for all applications. Click a single application, and
the function will only works for the currently selected application.
1. Click the "+" on the top right of the application bar to open the application selection
interface.
2. Select application to be added from the running applications or click the "browse" button to
add from the installed applications.
3. Click "OK" and the selected application will be added to the application bar.
To Next Page
Loading...
