12
Other:
Precision mode is to limit the device’s work area to a certain area. This function may allow you
to create more detailed drawings.
Pressure settings:
The pressure can be adjusted by adjusting the "output" and "pressure" curve or moving the
slider on the progress bar.
Current pressure can test your current stylus pressure.
Mouse mode:
The absolute mode is used by default, check this to use the relative mode (move the slider to
adjust the speed at which the cursor moves with you on the device).
Absolute coordinate (pen): Map the device’s work area to the screen’s display area, and each
point on the device fully maps to a specific point on the monitors. When the stylus is placed on
the device, the cursor jumps to the corresponding point on the monitors.
Relative coordinate (mouse): When you lift up the stylus, the cursor stays at the position you
left, and the operation mode is like a mouse.
To Next Page
Loading...
