7
Mac:
Navigate to the driver file you downloaded, unzip it, run the "dmg" file, and then follow the
prompts to complete the installation. During installation, you will be prompted to add the
required security settings (For the standard models: System Preferences -> Security & Privacy
-> Accessibility; For the Bluetooth models: System Preferences -> Security & privacy ->
Accessibility, Bluetooth). Please ensure that all XP-PEN options have been selected. Otherwise,
the device and driver will not work properly.
Linux:
DEB: Open the terminal window, enter "sudo dpkg –i" and execute the command after
dragging the installation file into it;
RPM: Open the terminal window, enter "sudo rpm –i" and execute the command after dragging
the installation file into it;
Tar.gz: Please unzip it first, then enter "sudo" in the terminal window, drag "install.sh" into it,
and then execute the command.
Notes:
1. Before installation, please close all opened antivirus software and painting applications.
2. If other drivers have been installed on the computer, please uninstall them first.
3. Restart the computer after installation.
4. For the best performance of your device, we highly recommend you check and update the
driver regularly from XP-PEN official website.
To Next Page
Loading...
