9
The screen’s display area can be set in the following three ways:
1. Set full screen: Set the display area of the selected monitor to the maximum.
2. Set screen area: Manually set the screen’s display area with the mouse.
3. Customize: Manually enter coordinates in the corresponding input boxes below X, Y, W and
H to customize the size of the screen’s display area, or use the mouse to drag on the screen icon
of the driver interface to adjust the screen’s display area.
Identify:
Identify all connected monitors, and numeric identifiers will be displayed in the lower-left corner
of each monitor.
b. Pen Tablet/Pen Display
Define the relationship between pen movement on the device and cursor movement on the
display.
The device’s work area can be set in the following four ways:
1. Full area: Maximize the device’s work area.
2. Proportion: Scales the device’s work area to the entire display area of the selected monitor.
3. Set area: Use the stylus to click the "upper left corner" position and the "lower right corner"
position on the device to select its work area.
To Next Page
Loading...
