Xpelair WAC6 User Manual

Do's and Don'ts
FM 2118/1
Part No. 567 2043 01 Rev B
Part No. 567 2043 01
(Rev C)
Do's and dont's
• Do read all the instruction leaflet before commencing installation.
• Do install the controller with a double pole isolating switch with a contact gap of 3mm
in each pole.
• Do make sure the mains supply is switched off before attempting to make electrical
connections or carry out any maintenance or cleaning
Guarantee
Customers outside UK - see international below.
• UK: The controller is guaranteed against defects for 3 years from the date of purchase.
• Xpelair reserve the right to repair or replace at their option.
• Please keep your purchase receipt.
• If you have any problems, contact Xpelair's Head Office at the address shown below.
Technical advice and service
Customers outside UK - see international below.
UK: Xpelair have a comprehensive range of services including:
• Free technical advice help-desk from Engineers on all aspects of ventilation.
• Free design service, quotations and site surveys.
• Service and maintenance contracts to suit all requirements.
Please ask for details:
• By telephone on Techline: +44 (0) 8709 000430
• By fax on Techfax: +44 (0) 8709 000530
• At the address below
Head Office, UK Sales Office and Spares
Applied Energy Products Ltd, Morley Way, Peterborough, PE2 9JJ England
Telephone: +44 (0) 1733 456789
Fax: +44 (0) 1733 310606
Sales/Spares Hotline: +44 (0) 8709 000420
Sales/Spares Faxline: +44 (0) 8709 000520
http:\\www.xpelair.co.uk
International
• Guarantee: Contact your local distributor or Xpelair direct for details.
• Technical Advice and Service: Contact your local Xpelair distributor.

Xpelair WAC6 Specifications

General

Brand	Xpelair
Model	WAC6
Category	Network Router
Language	English

Summary

General Information

Description

Details the features and purpose of the WAC6 and WAC6R fan controllers.

Installing the Controller

What the installer will need

Lists the necessary tools and materials for installing the controller.

Location of the Controller

Provides guidelines for selecting an appropriate installation location.

Preparing the Fan

Steps to prepare the fan before connecting it to the controller.

Wire the fan electrical connections

Instructions for making the electrical connections between the fan and controller.

Mounting the Controller

Remove the Cover and Mounting Frame

Steps to detach the controller's cover and mounting frame.

Mounting the Wall Box

Instructions for installing the wall box for the controller.

Wire the Controller electrical connections

Guides on connecting the controller's electrical wiring.

Connect to Power Supply

Steps for safely connecting the controller to the main power supply.

Using your Controller

Operating the Controller

Explains the features and functions of the controller.

Looking after the Controller

Cleaning

Instructions for cleaning and maintaining the controller.