For Samsung smartphone users, you can follow the below
video to enable the OTG function (USB Debugging), or connect
the borescope with your smartphone via the the Samsung
Type-C to USB-A adapter:
2) Download the free APP “WiFi Look” from “Google Play” or
download by scanning the QR code below and install it.
Tips:
Don't run the APP before you finished all below
operation steps.
3) Connect and Use
a. Turn on WiFi mode as this picture shows.
Connect the
borescope with your smartphone via Micro-B or Type-C
connector, then the LED will light up.
QR codeWiFi Look
USB WIFI
b. Click “Setting” on your smartphone, then search WiFi
“WiFiLook” and connect (No password needed).
c. Run the APP, then you can see the real-time video.
05
To Next Page
Loading...