Xray T2 - Page 19

19
307455
PB 5mm
902310
SH M3x10
902305
SH M3x5
902306
SH M3x6
903306
SFH M3x6
930407
BB 4x7x2.5
307455
PB 5mm
902310
SH M3x10
! IMPORTANT
The hole in top deck for the eccentric bearing holder is not directly along
the centerline of the top deck, but rather is slightly off-center. Mount the
top deck so that the off-center hole is to the RIGHT of the centerline.
5. STEERING
F = Futaba, Robe
K = KO, JR, Airtronics, Sanwa
Splines for servo on this side
FREE MOVEMENT
FREE MOVEMENT
INITIAL POSITION
FRONT
TAB TO FRONT
INITIAL POSITION
TAB TO FRONT
3x5mm