Xray T2 - Page 26

26
902306
SH M3x6
903308
SFH M3x8
903306
SFH M3x6
903308
SFH M3x8
8. FINAL ASSEMBLY
DOUBLE-SIDED TAPE
(NOT INCLUDED)
RECEIVER
(NOT INCLUDED)
SPEED CONTROLLER
(NOT INCLUDED)
Feed the receiver wire into the antenna tube
3x8mm
3x6mm
3x8mm
PINION
(NOT INCLUDED)
MOTOR
(NOT INCLUDED)
Adjust the motor so the pinion meshes with the spur
gear properly. Make sure the gear mesh is not too tight.
There should be a small amount of play between the
teeth of the pinion gear and spur gear.
DETAIL