Xray XT2 - Page 26

DIRTCARPET
26
5. FRONT SUSPENSION
902205
SH M2x5
981210
P 2x10
306219
SHIM 3x6x1
➊
➋
➌
2x
L=R
2x
L=R
1mm
NOTE
ORIENTATION
902254
SH M2.5x4
902312
SH M3x12
2x
L=R
Longer
3x12mm
3x12mm
Shorter
➊
➊
➋
➌
➌
NOTE
ORIENTATION
C-HUBS - RIGHT
#322210-M MEDIUM INCLUDED
#322210-H HARD OPTION
#322210-G GRAPHITE OPTION
MEDIUM - For low traction. More steering on low grip.
HARD - For medium traction. More steering, more
free in corners.
GRAPHITE - For high traction. More precise steering, less
stopping in corners.
C-HUBS - LEFT
#322220-M MEDIUM INCLUDED
#322220-H HARD OPTION
#322220-G GRAPHITE OPTION
(INITIAL SETTING)
TOP = SHORTER bushing
BOTTOM = LONGER bushing
Recommended for smooth tracks to gain more steering.
LOWER
LOWER
HIGHER
HIGHER
ROLL CENTER ALTERNATIVES
Longer
Longer
2.5º
2.5x4mm
28mm
2.5º
INITIAL
SETTING
CASTER ECCENTRIC BUSHINGS
LESS CASTER = increased steering off-power
MORE CASTER = less steering off-power
CUTAWAY VIEW
ASSEMBLY VIEW
STEERING BLOCK
A
B
4x
2x
2x
2x
2x
OPTIONAL HEX HUB EFFECTS
Different off-set hex hubs are used to
increase or decrease the track-width.
MORE OFF-SET
less steering
LESS OFF-SET
more steering
WHEEL HEX HUBS 12MM
#365360 +4.5mm 6 SLOTS OPTION
#365359 +3.75mm 5 SLOTS OPTION
#365358 +3.0mm 4 SLOTS OPTION
#365357 +2.25mm 3 SLOTS OPTION
#365356 +1.5mm 2 SLOTS INCLUDED
#365355 +0.75mm 1 SLOT OPTION
#365353 0mm 0 SLOTS OPTION
#365354 - 0.75mm Lightw. OPTION
#365361 -1.25mm Lightw. OPTION