xsto Mobility Robot M4 - Page 135

131
or any others to comply with this rule.
· Caution: Manufacturer will not responsible for any unauthorized actions that
cause interference.
· Caution: The M4 Mobility Robot cannot be used together with HF SURGICAL
EQUIPMENT.
Table 1
Guidance and Manufacture’s Declaration – Electromagnetic Emission
The M4 Mobility Robot is intended for use in the electromagnetic environment
specified below. User should assure that it is used in such an environment.
Emissions Test
Complian
ce
Electromagnetic Environment -
Guidance
RF emissions
CISPR 11
Group 1
The M4 Mobility Robot uses RF energy
only for its internal function. Its RF
emissions are very low and are not
likely to cause any interference in
nearby electronic.
RF emissions
CISPR 11
Class B
The M4 Mobility Robot is suitable for
domestic establishments and those
directly connected to the public
low-voltage power supply network.
Harmonic emissions
IEC 61000-3-2
Class A
Voltage
fluctuations/flicker
emissions
IEC 61000-3-3
/
Table 2
Guidance and Manufacture’s Declaration – Electromagnetic Immunity
The M4 Mobility Robot is intended for use in the electromagnetic environment
specified below. User should assure that it is used in such an environment.
Immunity Test
IEC60601 Test Level
Compliance
Electromagneti