ERG220 Rower
15
Folding the Rower
When not in use, the rower
can be folded to save space.
You can fold the rower by
locating the Ball Head Pin
(65) on the Slide Rail (2) and
removing it. Then, take the
Slide Rail (2) and move it into
a vertical position.
CAUTION: The Seat (38) will
glide down when the Slide
Rail (2) is raised.
Also take care to avoid the
Rear Stabilizer (4) when
moving the Slide Rail (2).
Once the Slide Rail (2) is in
the vertical position, re-insert
the Ball Head Pin (65) into its
slot on the Slide Rail (2).
This locks the rower into the
folded position.
CAUTION: The Slide Rail
(2) will not stay in the vertical
position before the Ball Head
Pin (65) is inserted. Make
sure to not let go of it before
it is secured or the Slide Rail
(2) may fall.
To Next Page
Loading...
General