The fridge slide must be securely and evenly bolted down to the floor of the vehicle or to wherever the slide is to
be used.
Under no circumstances can the slide be used other than when it is fixed down correctly on a smooth even
surface with no contortion of the frame.
The sliding tray is activated by depressing the both sides levers on the front to pull forward and lock in.
Heavy pushing without depressing the lever will result in damage to the lever.
Ensure that the tray is firmly locked into place when returning the tray to its inward position.
This fridge slide is designed to carry fridges up to 80kgs including contents and the sliding table with 15kg
capacity. It is not recommended for commercial use and no warranty applies if used so.
To Previous Page
Loading...