xtorm FS401 User Manual

1 SPECIFICATIONS
2 PRODUCT OVERVIEW
3 CHARGING YOUR DEVICE
3.A
Connect the USB end of the charging cable to the USB-A output of the Power Bank and
the other end to the input of your device. The charging will start automatically.
3.B Charging some devices requires a charging cable other than the one supplied. E.g. an
Apple Lightning
®
or a Micro USB cable.
4 RECHARGING THE POWER BANK
4.A
Connect the USB-C end of the charging cable to output 2 of the Power Bank and the USB
end to a wall charger.
4.B For the fastest charging possible use a 20W USB-C PD charger. This will fully recharge the
Power Bank within 5 hours.
EN - ENGLISH
5 LED POWER INDICATOR
5.A
Press the Power Button once to display the battery level remaining in the Power Bank via
the LED display.
5.B Each lit LED light indicates 25% remaining energy in the Power Bank. At 4 lit lights, the
Power Bank is as good as fully charged.
6 IN THE BOX

xtorm FS401 Specifications

General

Brand	xtorm
Model	FS401
Category	Accessories
Language	English