xtorm FS5100 User Manual

1 SPECIFICATIONS
2 PRODUCT OVERVIEW
3 CHARGING YOUR DEVICE
3.A
Connect the USB end of the charging cable to the USB-A output of the Power Bank and
the other end to the input of your device. The charging will start automatically.
3.B Charging some devices requires a charging cable other than the one supplied. E.g. an
Apple Lightning
®
or a Micro USB cable.
4 RECHARGING THE POWER BANK
4.A
Connect the USB-C end of the charging cable to output 3 of the Power Bank and the USB
end to a wall charger.
4.B For the fastest charging possible use a 18W USB-C PD charger. This will fully recharge the
Power Bank within 3.4 hours.
EN - ENGLISH
5 LED POWER INDICATOR
5A
Press the Power Button once to display the battery level remaining in the Power Bank via
the LED display. Improved Power Button function:
- single press to turn on/off the diplay
- double press to fully turn on/off the Power Bank
5B The display shows the remaining battery percentage between 0% (empty) and 100% (fully
charged).
5C The fast charge indicator will light up when you are using the correct cable for fast charging
your device. (20W USB-C PD and higher).
6 IN THE BOX

xtorm FS5100 Specifications

General

Brand	xtorm
Model	FS5100
Category	Battery Pack
Language	English