A
Connect the Xtorm Travel
Charger with the power outlet.
CONNECT A CHARGING CABLE
2/4
PLUG THE AC ADAPTER
INTO THE POWER OUTLET
3/4
A
CHARGE YOUR DEVICE
4/4
Please note: For fast charging via Power Delivery (PD)
your device needs to be compatible with USB-C PD.
Please check before using the product.
If your device is not compatible with USB-C PD
the charging process will still work but also at
a slower rate.
To be compatible with QuickCharge. Please check
before using the product. If your device is not compatible
with QuickCharge the charging will not be fast charging.
Your device will
indicate charging status.
B
Connect the other USB-C connector ( )
with the input of your device.
It’s also possible to charge 2 devices at
the same time.
B
To Next Page
Need help?
General
