xtorm XB101 User Manual

2. QUICK START / First use
All Xtorm chargers are pre-charged.
You can instantly start charging your mobile
CHARGED decive.
3. Charge the Power Bank by USB or A/C
1. Product overview
USB CHARGING CABLE
— LED LIGHT
BUTTON
BUTTON
FOR IPHONE/IPAD USE
LED LIGHT ———— OWN USB CHARGING
CABLE.
— BUILT IN USB CABLE
USB OUT 1 (5V) USB OUT 2 (5V)
METHOD 2: CHARGING INDICATION:
Connect the micro METHOD 1:
Connect the USB cable Connect the USB cable Press button 1x
Connect the Connect with your
USB cable with mobile device using USB cable with
USB Out the micro USB cable USB IN. with the USB Port with your A/C adapter** :
or your own USB or with your PC/laptop. LED lights show:
cable. Or use the built in j } ** Not included 1 led 0-25%
USB cable 2 led 25-50%
Expect 1-2 hours* 3 led 50-75%
charging time 4 led 75-100%
Expect 4-5 hours* charging time
4. Charge your mobile device Charging 2 devices at the same time
& Did you know?
1 x short press = Battery status + USB Charging activate
1x long press = USB Charging functionality on/off
Dynamic
power balance
When 2 devices
are connected, the output
is automatically balanced
between these two outputs
for the fastest charging
FOR
IPHONE/IPAD
USE
BUTTON
results.
OWN USB CHARGING
SES LED LIGHT
Your mobile device
is out of power
Connect with your
mobile device using
the micro USB cable
or your own USB
cable
POWER INDICATION:
Press button 1x
1 led
2 led
3 led
4 led
0-25%
25-50%
50-75%
75-100%
Connect the USB cable
with charger and press the
button to start charging.
Expect 1-2hours*
charging time
Your smartphone
will indicate charging
status.
* By ideal conditions,
CS Important
When charging 2 devices
at the same time;
Connect the device with
the highest capacity on
port 1.
E.g. when charging a tablet
and smartphone; connect
the tablet on port 1 and
the smartphone on port 2.

xtorm XB101 Specifications

General

Brand	xtorm
Model	XB101
Category	Battery Pack
Language	English