Correcting Drifts
Flying Faster
It is normal for the Mini Stealth Drone to drift slightly. If you find the Mini Stealth Drone
consistently drifting in any direction during flight, you may need to adjust the trim settings.
Basically, the trim ‘fine-tunes’ the speed of the propellers. Simply press (and hold) the
appropriate trim button opposite to the movement until the Mini Stealth Drone is flying
straight.
Want to perform stunts in high speed? Simply press
the Speed Button to switch to Boost mode and fly
the Mini Stealth Drone even faster than ever before!
You will hear two (2) beeps indicating the drone is in
Boost mode. Press the Speed Button again to return
to Normal speed. You will hear a single beep.
If you find that the Mini Stealth Drone is
turning slowly left or right when you’re
not using the left stick on the controller,
then you’ll need to adjust the trim using
the Rotation Trim Buttons located
beneath the left stick.
If the Mini Stealth Drone is moving
either left or right without pivoting, use
the Sideways Trim Buttons located
beneath the right stick.
Press and hold the Trim Reset Button beneath
the left stick while you press the ON/OFF
Button to turn on the controller. (Make sure the
controller is turned off first).
If the Mini Stealth Drone is drifting
forwards or backwards, use the
Movement Trim Buttons to compensate.
It’s located beneath the right stick.
If the Mini Stealth Drone is moving
forwards, compensate by moving the trim
backwards (i.e., down) and vice-versa.
Rotation Trim
Sideways Trim
Resetting Trim Settings to Default
Movement Trim
To Next Page
Loading...