Xtreme Power 96115 - Assembly; Foot Mounting; Seat Installation

3
SEAT TUBE
SEAT
ADJUSTMENT
KNOB
SEAT TUBE
SEAT
ADJUSTMENT
KNOB
FIXING SCREWSFIXING SCREWS
ADJUSTMENT
TUBE
ADJUSTMENT
TUBE
SEAT
MOUNT
SEAT
MOUNT
1. FOOT MOUNTING: Afx the rear wheel base with the
provided xing screws, tighten.
2. CUSHION INSTALLATION STEP 1: Seat adjustment
knob mounted on the top and bottom screw holes. Screw
in 3-5 turns, then lift the seat tube, pull out the knob to
adjust the hole, then tighten.
3. CUSHION INSTALLATION STEP 2: The seat will move
back and forth above the steel pipe. Install the cushion
onto the lift with screws and tighten.
4. CUSHION INSTALLATION STEP 3: The seat is
mounted on the front. Adjust the angle then tighten the
screws.
ASSEMBLY