To
ols Needed
Rubber Mallet; Cordless Drill; Drill Bit
2. Warning and Caution
a) Check building codes/premitt
ing
Please consult your local Building Department before installation of your step and equipment in
order to reduce the risk of drowning, electrocution, falls, or other serious injury or death.
Equipment installation must comply with the codes of authority having jurisdiction and may
require permits(e,g.,building, plumbing, electrical, zoning, etc.). Be sure that barriers (fences,
gates, etc.) restricting spa access meet local codes.
b) Use for intended purpose only
Not intended for storing hazardous products(such as chemicals), which is not a secure location.
c) Check that you have all required parts
Check the contents of the carton with the parts list for the step. All parts and hardware are
required. DO NOT attempt to assemble or install the step if any parts missing.
d) Select an appropriate location
The Step must be located on a level solid base and in a location that will be in full view of
competent adult supervision when in use.
e) Follow all instruct
ions
- All instructions must be followed completely as the manual shown for stable corr
ect assembly
and installation.
- Use the hand tools and equipment appropriately according to the manufacturer’s
recommendations. CORDLESS DRILL ONLY. DO NOT use a corded drill in or around the pools
in order to lower the risks of electrocution.
f
) Lift safely
Have another person to help when lifting awkward or heavy loads.
g) Double check after installation
After well assembled and installationed, please double check the instructions and procedures
to make sure nothing has been overlooked before starting to use the step.
2
To Next Page
Loading...