Xylem Bell & Gossett Ecocirc+ 20-18 - Rotate the Motor Body of the Pump

Correct Incorrect
3. Use a torque wrench to tighten the nuts on the companion flange fasteners.
Fasteners Torque
Companion flange fasteners 13 Nm (115 lbf.in)
Union threaded ring nuts See Torque specification on page 31
4.1.4 Rotate the motor body of the pump
The motor assembly of the pump can be rotated to ±90°.
1. Remove the screws from the pump body.
2
1
3
WS012582A
1. Pump body
2. Screw
3. Junction box
2. Rotate the pump housing.
4 Installation
Ecocirc+ 20-18 Installation, Operation, and Maintenance Manual 13