Xylem FLYGT 3171 - Transportation and Storage; Inspecting and Handling the Unit; Lifting and Temperature Guidelines

Transportation and Storage
Transportation
and Storage
lnspect
the delivery
lnspect the
package
1.
2.
3.
lnspect the unit
1.
4.
Transportation
Precautions
lnspect the
package for damaged
or missing
items upon delivery.
Note any damaged
or missing
items on the
receipt and freight bill.
File
a claim
with
the
shipping
company
if anything
is
out
of order.
lf
the
product has
been
picked
up
at a distributor,
make a claim directly
to the
distributor.
Remove
packing materials
from the
product.
Dispose of all
packing
materials in accordance
with
local regulations.
lnspect the
product
to
determine
if any
parts have been damaged
or are
missing.
lf
applicable,
unfasten
the
product
by
removing any
screws, bolts,
or straPS.
For
your personal safety,
be careful
when
you handle
nails and straps.
Contact
the local
sales
representative
ifthere
is any issue.
guidelines
2.
3.
DANGER: Crush
Hazard
Moving
parts
can
entangle
or crush.
Always
disconnect
and
lock out
power
before
serviciig
to
prevent unexpected
startuP.
Failure
to do so could
result
in death
or serious
rnlury.
Position
and
{astening
The
unit can
be transported
either
horizontally
or vertically.
Make sure
that the
unit is
securely
fastened
during
transPo.tation,
and
cannot
roll or
fall over'
Lifting
Always
inspect
the lifting
equiPment
and
tackle before
starting
any
work'
WARNING:
Crush
Hazard
1
)
Always
lift the unit
by
its designated
lifting
points 2) Use
suitable
lifting equipment
and
enrrre
that
the
product is
properly harnessed.
3)
Wear
personal
Protective
equipment
4)
Stay
clear of
cables
and suspended
loads.
NOTICE:
Never
lift the unit
by
its cables or
hose.
Lifting
equipment
Lifting
equipment
is always
required
when handling
the
unit.
lt must {ulfill
the
following
requirements:
.
The
minimum
height
(contact
your local
sales and
service
representative
for
in{ormation)
betw-een
the lifting
hook and
the
{loor must
be sufficient
to
li{t the unit.
o
The
lifting equipment
must be
able to
hoist the
unit straight
up and
down,
preferably
without the
need
for resetting
the
lifting
hook.
.
The
lifting equipment
must be securely
anchored
and
in good
condition'
Flygt 3171
lnstallation, OPeration,
and Maintenance
Manual
8